BETCO HP GYM COAT, WATER BASED FLOOR FINISH, WITH CATALYST, 753.3 OZ.

Description

PREPARATION: FOR NEW SANDED FLOORS: Prepare the floor using accepted NWFA or MFMA procedures. Vacuum the dust and tack with a cotton towel. All residue must be removed. Apply water-based wood sealer following BETCO HP GYM COAT WATER BASED WOOD FLOOR Coating Application Procedures. FOR SCREENING AND RECOATING: Always clean the floor prior to screening. Mix Betco GT Cleaner at 32 oz./gal. or 250 mL/L (1:4) with water and tack using a clean towel. Screen using new 100 or 120 grit screens or higher, vacuum, and tack using a water moistened cotton towel. APPLICATION: While stirring product, add catalyst slowly, and continue mixing for 30 seconds. Mix thoroughly and let stand for 10 minutes. Once catalyzed, pot life is 24 hours. Apply at 500 – 700. sq.ft./gal. Pour finish into a clean, dry, plastic pour can. Pour a 4-inch wide line of finish along with one.

• Coat your gymnasium’s floor and maintain it to keep it looks glossy and new.
• The low-VOC formula provides a healthier indoor environment and quick drying.
• A clear finish helps to look at the wood’s naturally beautiful finish.