BETCO HP GYM COAT, WATER BASED FLOOR FINISH, WITH CATALYST, 753.3 OZ.

$390.99

This Water-Based Floor Finish formula helps in keeping your sports floor to look completely new and the high-shine formula dries quickly.

Description

PREPARATION: FOR NEW SANDED FLOORS: Prepare the floor using accepted NWFA or MFMA procedures. Vacuum the dust and tack with a cotton towel. All residue must be removed. Apply water-based wood sealer following BETCO HP GYM COAT WATER BASED WOOD FLOOR Coating Application Procedures. FOR SCREENING AND RECOATING: Always clean the floor prior to screening. Mix Betco GT Cleaner at 32 oz./gal. or 250 mL/L (1:4) with water and tack using a clean towel. Screen using new 100 or 120 grit screens or higher, vacuum, and tack using a water moistened cotton towel. APPLICATION: While stirring product, add catalyst slowly, and continue mixing for 30 seconds. Mix thoroughly and let stand for 10 minutes. Once catalyzed, pot life is 24 hours. Apply at 500 – 700. sq.ft./gal. Pour finish into a clean, dry, plastic pour can. Pour a 4-inch wide line of finish along with one.

  • Coat your gymnasium’s floor and maintain it to keep it looks glossy and new.
  • The low-VOC formula provides a healthier indoor environment and quick drying.
  • A clear finish helps to look at the wood’s naturally beautiful finish. 

Reviews

There are no reviews yet.

Be the first to review “BETCO HP GYM COAT, WATER BASED FLOOR FINISH, WITH CATALYST, 753.3 OZ.”

Your email address will not be published. Required fields are marked *